Wide Bay, Queensland’s #1 Garage Epoxy Specialists
Epoxy Garage Flooring Wide Bay
Industrial-grade epoxy garage floor coatings for Hervey Bay, Bundaberg, Maryborough, and the entire Wide Bay region. Professionally installed, built to last.
Fully Licensed & Insured
Work with confidence knowing your concrete grinding project is handled by a properly insured professional team.
Protected ServiceLocally Owned, Wide Bay
A local team that understands Wide Bay conditions, local job needs, and practical service expectations.
Regional KnowledgeFree On-Site Quotes
Every project begins with a free site assessment so scope, access, and slab condition can be properly reviewed.
No-Obligation VisitIndustrial-Grade Materials
Only industrial-grade systems and correct preparation methods are used for stronger performance and durability.
Built To LastWhat We Do
Epoxy Garage Floor Wide Bay — Done Right
Your garage floor takes a beating — from oil spills and tyre marks to Queensland’s relentless humidity and UV exposure. A standard paint job won’t survive it. An epoxy garage floor coating, professionally installed, will.
At Supreme Coatings AU, we’ve been transforming concrete garage floors across Wide Bay for over six years. From a single-car garage in Hervey Bay to a multi-bay commercial workshop in Bundaberg — we bring the same level of preparation, precision, and premium materials to every project.
We don’t cut corners on surface prep, and we don’t use watered-down, DIY-grade products. Every epoxy garage floor we install is diamond ground, primed, base-coated, and sealed with a UV-stable polyurethane topcoat — a system built to last 10–20 years in Queensland conditions.
The result? A garage floor that’s seamless, chemical-resistant, easy to clean, and genuinely impressive to look at.
Residential Epoxy Flooring Wide Bay
- Bonds chemically and mechanically to concrete — won't peel like paint
- Resists oil, fuel, coolant, and chemical spills
- Seamless surface — no grout lines to harbour grime or bacteria
- Withstands tyre hot-spots, abrasion, and heavy vehicle loads
- UV-stable topcoat prevents yellowing and fading in Queensland sun
- Anti-slip aggregate — safe, even when wet
- 10–20+ year lifespan with correct system and preparation
- 10–20+ years transforms the look of any garage — 30+ colour combinations available lifespan with correct system and preparation
Local Knowledge Matters
Why Epoxy Garage Floors in Wide Bay Require a Local Specialist
Wide Bay’s subtropical climate creates conditions that challenge standard epoxy installations. Here’s what separates a flooring company that knows the region from one that doesn’t.
UV Stability Is Non-Negotiable
01
Wide Bay gets over 280 sunny days per year. Standard epoxy yellows and chalks within 12–18 months under UV exposure. Every garage floor we install is finished with an aliphatic polyurethane topcoat specifically formulated for Queensland’s UV index.
Thermal Expansion on Large Slabs
02
Concrete expands and contracts with Queensland’s temperature swings. Existing control joints and expansion joints in large garage slabs must be respected and correctly managed — bridged improperly, they’ll crack through any coating. Our install methodology accounts for this on every project.
Correct Surface Profile
03
Commercial-grade diamond grinding opens the pore structure of concrete to a CSP 3–4 mechanical profile — the industry-standard benchmark for epoxy adhesion. Acid etching alone (common in DIY installs) doesn’t come close, especially on smooth, power-trowelled garage slabs.
Industrial-Grade Australian Products
04
We source our epoxy systems from trusted Australian suppliers — products tested and specified for the Queensland climate. No imported budget products, no watered-down DIY kits. The same industrial-grade systems used in commercial warehouses and food-processing facilities.
Locally Owned & Accountable
05
We live and work in Wide Bay. Our reputation is built here, and every job we do is a reference for the next one. You’ll deal with the owners directly — not a call centre. If anything isn’t right, we’ll come back and make it right. No run-arounds.
OUR PROCESS
How Epoxy Flooring Is Installed
Our 6-step installation process — the same approach on every residential, commercial, and industrial project across Wide Bay.
01
Free On-Site Assessment
We visit your property, assess the concrete slab, test for moisture (critical in Queensland's climate), identify cracks, contamination, and previous coatings, and recommend the correct system for your environment and budget.
02
Diamond Grinding — Surface Preparation
Using commercial-grade diamond grinding equipment with dust extraction, we open the pore structure of the concrete, remove laitance, old coatings, and contaminants, and create a mechanical profile (CSP 3–4) for maximum adhesion.
03
Crack, Spall & Defect Repair
All cracks, holes, and surface defects are filled using high-performance epoxy repair mortars, levelled flush, and allowed to cure before any coating is applied — ensuring a seamless final surface.
04
Penetrating Primer Application
A moisture-tolerant penetrating epoxy primer is applied to seal the concrete, prevent outgassing (the cause of surface bubbles in Queensland's heat), and create the chemical bond for subsequent coating layers.
05
Epoxy Base Coat & Decorative Layer
The main epoxy system is applied to specification thickness. Decorative flake is broadcast into the wet coat; for metallic or solid systems, pigmented epoxy is roller-applied in controlled conditions per product data sheet.
06
UV-Stable Polyurethane Topcoat & Cure, Inspection & Handover
A two-part UV-stable aliphatic polyurethane topcoat is applied for colour stability, abrasion resistance, and chemical protection. Non-negotiable for Queensland's high UV exposure environment.
About Supreme Coatings AU
Wide Bay's Epoxy Flooring Specialists
Supreme Coatings AU is a locally owned epoxy flooring company based in Wide Bay, Queensland. We specialise in durable epoxy floor coatings for residential garages, commercial spaces, and heavy-duty industrial environments across Hervey Bay, Bundaberg, Maryborough, the Fraser Coast, Gympie, and surrounding areas.
With over six years of experience and more than 300 completed projects across the Wide Bay and Burnett region, our team has built a reputation on reliable workmanship and floors that genuinely last. Every project is managed and installed by our own trained team — we don’t subcontract.
We use industrial-grade epoxy systems from trusted Australian suppliers, combined with professional diamond grinding and surface preparation on every job. We’re fully insured, operate in compliance with Queensland building regulations, and provide transparent written quotes with no hidden costs.
Our process follows the ICRI (International Concrete Repair Institute) surface preparation guidelines — the same standards used in commercial and industrial flooring specification. We don’t take shortcuts with prep, because we know that’s where most epoxy failures begin.
Years Experience
Projects Completed
Queensland building compliance · Free on-site quotes · No subcontractors
Common Questions
Frequently Asked Questions:
How long does epoxy flooring last in garage?
A professionally installed epoxy garage floor with correct surface preparation and a UV-stable polyurethane topcoat can last 10–20 years in Queensland conditions. Longevity is primarily determined by the quality of surface preparation — not the product itself. Most premature failures (peeling, delamination) occur because the concrete wasn’t properly ground, primed, or tested for moisture before coating.
Is epoxy garage flooring slippery?
A smooth epoxy finish can be slippery when wet. That’s why Supreme Coatings AU incorporates anti-slip aggregate into every garage floor topcoat as standard — meeting AS 4586 slip resistance requirements for wet areas. The decorative flake system also provides inherent texture that improves grip. We can adjust the level of anti-slip aggregate for your specific needs.
Can epoxy be applied over existing concrete?
Yes — most existing concrete garage floors are suitable for epoxy coating. The slab must be structurally sound, free of active moisture issues, and professionally diamond ground to remove any previous coatings, laitance, or contamination before epoxy is applied. We assess every slab individually during our free on-site quote and will advise honestly if any issues would affect the result.
How long does installation take and when can I use the garage?
Most residential garage epoxy installations take 2–3 days: Day 1 for surface grinding and prep, Day 2 for coating application. You can walk on the floor after 24 hours, but vehicle access is recommended after 5–7 days to allow full cure. We’ll give you exact timelines based on the system selected and current weather conditions.
Why is epoxy peeling on my current garage floor?
Epoxy peeling is almost always caused by inadequate surface preparation — typically the slab wasn’t ground to the correct mechanical profile, moisture wasn’t tested, or a DIY kit was applied over a smooth, sealed surface that epoxy can’t bond to. If you have a peeling epoxy floor, we can assess, remove the failed coating, correctly prepare the slab, and install a system that will last.
Get Started
Get a Professional Industrial Epoxy Solution That Performs
If your facility requires a durable, low-maintenance, and long-lasting flooring system, Supreme Coatings Wide Bay delivers reliable Industrial Epoxy Wide Bay Queensland solutions built for performance.
Contact our team today for a site inspection and tailored quote.
- Consultation
- Preparation
- Application
