Wide Bay’s Workshop Flooring Specialists
Workshops Epoxy Flooring Wide Bay
Fully Licensed & Insured
Work with confidence knowing your concrete grinding project is handled by a properly insured professional team.
Protected ServiceLocally Owned, Wide Bay
A local team that understands Wide Bay conditions, local job needs, and practical service expectations.
Regional KnowledgeFree On-Site Quotes
Every project begins with a free site assessment so scope, access, and slab condition can be properly reviewed.
No-Obligation VisitIndustrial-Grade Materials
Only industrial-grade systems and correct preparation methods are used for stronger performance and durability.
Built To LastWorkshop Epoxy Flooring Wide Bay
Why Workshop Floors Need More Than a Basic Coating
A workshop floor takes punishment that no residential or commercial surface comes close to. Forklift traffic, heavy vehicle weights, hydraulic oil spills, battery acid, grinding sparks, dropped tools, and constant abrasion — a standard sealer or paint won’t survive it. Workshop epoxy flooring is a structural-grade system that bonds at a molecular level to your concrete slab, creating a surface that genuinely performs under industrial conditions.
At Supreme Coatings AU, we install epoxy flooring for workshops across Wide Bay using the same high-build systems specified for commercial warehouses and manufacturing facilities. That means correct thickness, proper chemical resistance ratings, and surface preparation that meets ICRI guidelines — not just a quick roll-on coat.
Whether it’s a mechanical workshop in Hervey Bay, a fabrication shed in Bundaberg, or a heavy-vehicle bay in Maryborough, we assess your slab, understand your operational demands, and install a system built to last 10–20+ years.
- UV-Stable Finishes: Resist fading and yellowing under Australia's intense sun exposure.
- Slip-Resistant Textures: Anti-slip additives for safer outdoor environments, especially wet areas.
- Waterproof Protection: Shields against moisture damage from heavy rainfall and humidity.
- High Durability: Withstands vehicles, foot traffic, and all outdoor elements.
- Low Maintenance: Easy to clean and built to last—not just months, but years.
Workshop Epoxy Flooring Wide Bay — Application
Epoxy Flooring for Every Type of Workshop in Wide Bay
We install industrial workshop epoxy flooring across all common workshop types throughout the Wide Bay and Burnett region.
Mechanical & Auto Workshops
The most demanding workshop environment — constant oil, fuel, and solvent exposure combined with heavy vehicle weights and dropped tools. Our systems are specified for exactly this.
- High-build 2–3mm epoxy system with polyurethane topcoat
- Oil and chemical contamination degreasing before prep
- Anti-slip broadcast for wet-area safety
- Bay and aisle line marking available
Industrial & Fabrication Sheds
Fabrication sheds, steel workshops, and manufacturing bays need floors that handle sparks, grinding swarf, heavy machinery, and forklift traffic without degrading.
- Forklift-rated 3–5mm high-build system
- Spark and impact-resistant formulation
- Dust-free diamond grinding for occupied sites
- Safety colour zoning available
Agricultural Sheds & Farm Workshops
Farm workshops and machinery sheds in Wide Bay’s agricultural belt face unique challenges: chemical fertilisers, agricultural sprays, mud and grime, and heavy equipment loads.
- Chemical-resistant formulation for agricultural use
- Heavy vehicle and machinery-rated thickness
- Shed floor coating in Wide Bay — slab assessment included
- Wide-area coverage across regional properties
Warehouses & Storage Facilities
Wide Bay warehouse operators rely on us for heavy-duty epoxy flooring that handles constant pallet jack and forklift traffic, point loads from racking systems, and long-term abrasion.
- Warehouse-grade high-build epoxy with PU topcoat
- Aisle and bay line marking integrated at installation
- Anti-static options for sensitive storage environments
- Crack and spall repair before coating
Why Us
Why Choose Supreme Coatings in Wide Bay Queensland?
Local Experience
We understand Wide Bay’s climate conditions and how they impact concrete surfaces.
Industry Expertise
Our team specialises in commercial and industrial epoxy flooring systems.
Strict Safety Standards
We follow Australian safety compliance requirements and workplace regulations.
Quality Materials
We use premium-grade industrial epoxy products for maximum durability.
Transparent Quotes
Clear scope of work with no hidden surprises.
Workmanship Guarantee
We stand behind our installations with quality assurance.
Epoxy Flooring Systems
Choosing the Right Epoxy System for Your Wide Bay Workshop
Not all workshop epoxy systems are the same. The right choice depends on your traffic loads, chemical exposure, and budget. Here’s how our main systems compare.
| System | Thickness | Best For | Chemical Resistance | Load Rating |
|---|---|---|---|---|
| Standard Epoxy Coating Light Duty | 0.3–0.5mm | Home garages, hobby workshops, low-traffic shed floors | Mild oils and water | Passenger vehicles, light foot traffic |
| High-Build Epoxy Most Popular | 1–2mm | Mechanical workshops, commercial garages, industrial sheds | Fuels, oils, solvents, mild acids | Light forklifts, vans, utes, workshop equipment |
| Industrial Epoxy + PU Topcoat Heavy Duty | 2–3mm | Mechanical workshops, fabrication bays, warehouses | Full chemical resistance — acids, bases, solvents, fuels | Heavy forklifts, trucks, heavy machinery |
| Epoxy Mortar System | 3–6mm | Heavy industrial workshops, abattoirs, food manufacturing, extreme load environments | Aggressive chemical and thermal resistance | Extreme point loads, heavy vehicle traffic, impact |
| Resin Flooring (Polyurethane) | 2–4mm | Workshops needing thermal shock resistance (e.g., cold storage adjacent areas) | Excellent chemical resistance | Heavy vehicle rated, flexible — resists cracking |
Not sure which system is right for your workshop? Our on-site assessment includes a recommendation with reasoning — at no cost.
OUR PROCESS
How Epoxy Flooring Is Installed
Our 6-step installation process — the same approach on every residential, commercial, and industrial project across Wide Bay.
01
Free On-Site Assessment
We visit your property, assess the concrete slab, test for moisture (critical in Queensland's climate), identify cracks, contamination, and previous coatings, and recommend the correct system for your environment and budget.
02
Diamond Grinding — Surface Preparation
Using commercial-grade diamond grinding equipment with dust extraction, we open the pore structure of the concrete, remove laitance, old coatings, and contaminants, and create a mechanical profile (CSP 3–4) for maximum adhesion.
03
Crack, Spall & Defect Repair
All cracks, holes, and surface defects are filled using high-performance epoxy repair mortars, levelled flush, and allowed to cure before any coating is applied — ensuring a seamless final surface.
04
Penetrating Primer Application
A moisture-tolerant penetrating epoxy primer is applied to seal the concrete, prevent outgassing (the cause of surface bubbles in Queensland's heat), and create the chemical bond for subsequent coating layers.
05
Epoxy Base Coat & Decorative Layer
The main epoxy system is applied to specification thickness. Decorative flake is broadcast into the wet coat; for metallic or solid systems, pigmented epoxy is roller-applied in controlled conditions per product data sheet.
06
UV-Stable Polyurethane Topcoat & Cure, Inspection & Handover
A two-part UV-stable aliphatic polyurethane topcoat is applied for colour stability, abrasion resistance, and chemical protection. Non-negotiable for Queensland's high UV exposure environment.
Common Questions
Common Questions About Epoxy Flooring for Workshops in Wide Bay
How much does workshop epoxy flooring cost in Wide Bay?
Workshop epoxy flooring in Wide Bay typically depends on floor size, slab condition, required coating system thickness, and whether line marking or specialist prep is needed. Mechanical workshops with oil contamination require more preparation, which affects the final cost. Supreme Coatings AU provides a free on-site quote with a written, itemised scope — so you know exactly what’s included before any work begins.
What type of epoxy is best for a workshop floor?
For most mechanical workshops and industrial bays, a 2–3mm high-build epoxy system with a two-part polyurethane topcoat is recommended. This provides full chemical resistance to fuels and oils, forklift-rated load capacity, and maximum abrasion resistance. The right system depends on your specific use — our on-site assessment will identify the correct specification for your environment.
How long does epoxy flooring last in a workshop?
With correct surface preparation and an appropriate industrial system, workshop epoxy flooring typically lasts 10–20+ years. The primary performance variable is surface preparation: diamond grinding to ICRI CSP 3–4 standard creates the mechanical bond that determines long-term adhesion. Workshops with significant chemical exposure may benefit from a recoat of the topcoat at 8–12 years to maintain full chemical resistance.
Can epoxy flooring handle oil and fuel spills?
Yes — industrial-grade epoxy systems are engineered to resist motor oils, hydraulic fluids, diesel, petrol, battery acid, industrial solvents, and cleaning chemicals. Spills remain on the seamless surface and can be wiped up without soaking into the concrete. For heavily contaminated workshops, a chemical-resistant polyurethane topcoat provides an additional barrier for maximum spill protection.
How long does epoxy flooring installation take in a workshop?
Most home workshop and garage epoxy flooring projects in Wide Bay are completed in 2–3 days: one day for diamond grinding and prep, one day for primer and base coat, one day for the polyurethane topcoat. Larger industrial workshop bays (200m²+) typically take 3–5 days. We’ll confirm the timeline during the on-site assessment.
Is epoxy flooring slippery in workshops?
Standard gloss epoxy can be slippery when wet or contaminated with oil. For workshop environments, we incorporate anti-slip broadcast aggregate as standard. This meets AS 4586 slip resistance requirements for wet areas and provides adequate traction in environments where oils and fluids are a constant presence. Additional anti-slip aggregates can be applied for particularly high-risk areas.
Do I need to empty my workshop before epoxy installation?
Yes — the entire floor area needs to be clear of all vehicles, equipment, shelving, and stored items before surface preparation begins. This is non-negotiable, as diamond grinding must access the complete floor area for uniform adhesion. We’ll discuss access sequencing and staging during the free on-site assessment.
Can you epoxy a workshop floor with existing cracks?
Yes. Existing cracks and surface spalling are addressed during our preparation process using high-performance epoxy repair mortars, levelled flush with the surrounding slab before any coating is applied. Structural cracks (moving cracks) require specific treatment and will be identified and discussed during the site assessment. We don’t coat over defects — we fix them first.
Get Started
Get a Professional Epoxy Solution That Performs
If your facility requires a durable, low-maintenance, and long-lasting flooring system, Supreme Coatings Wide Bay delivers reliable Industrial Epoxy Wide Bay Queensland solutions built for performance.
Contact our team today for a site inspection and tailored quote.
- Consultation
- Preparation
- Application